.45-90-2.4 Inch Sharps Straight Reloading Essentials

The 3-Die Roll Crimp Set is for loading straight-wall cartridges. Its steel Sizer Die sizes the case and de-primes. Note: Cases must be lubricated. The Expander Die expands the case to the proper diameter to accept the bullet, and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and roll crimps.

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.

• 348 Winchester
• RCBS shell holders are built for Single Stage and Turrets Presses.
• RCBS shell holders are manufactured to exacting tolerances.
• RCBS shell holders are hardened for years of use.
• RCBS shell holders ensure proper alignment between the cartridge and die.
• The Shell holders are cut to .125" depth for proper headspacing.
• RCBS Limited Lifetime Warranty.

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.

• .45-70 U.S. Government
• .30-378 Weatherby Magnum
• .338 Lapua Magnum (With Lapua Brass)
• .338-378 Weatherby Magnum
• .378 Weatherby Magnum
• .40-65 Shiloh-Sharps - .408"
• .45-90-2.4" Sharps Straight
• .45-100-2.6" Sharps Straight
• .45-110-2 7/8" Sharps Straight
• .45-120-3 1/4" Sharps Straight
• .460 Weatherby Magnum
• RCBS shell holders are built for Single Stage and Turrets Presses.
• RCBS shell holders are manufactured to exacting tolerances.
• RCBS shell holders are hardened for years of use.
• RCBS shell holders ensure proper alignment between the cartridge and die.
• The Shell holders are cut to .125" depth for proper headspacing.
• RCBS Limited Lifetime Warranty.

These high-quality replacement parts are compatible with the RCBS® Rock Chucker®, Reloader Special™ and most C-frame single-stage presses.

RCBS® Case Trimmer Collets work like a draw collet on a lathe. They secure cases for trimming to length. Note: For use with Rotary Case Trimmer and Rotary Case Trimmer—2 only.

RCBS® Case Trimmer Pilots are tapered to guide pilot into the case mouth. The design prevents a case from wobbling when being trimmed to length. For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer—2 and Rotary Case Trimmer. For use with RCBS Case Trimmers only.