Full-Length Die Set - Group A - Popular Rifle Cartridges

Full-Length Die Set - Group A - Popular Rifle Cartridges

5 out of 5 Customer Rating
$41.99 - $94.45
Full-Length Die Set - Group A - Popular Rifle Cartridges
5 out of 5 Customer Rating
$41.99 - $94.45
Best Seller

Full-Length Die Set - Group A - Popular Rifle Cartridges

$41.99 - $94.45

RCBS Full-Length die sets are machined from our proprietary die steel to exacting tolerances, then undergo a meticulous finishing process to give the hand-loader the best dies on the market. Each Full-Length set includes a Full-Length sizing die, Bullet Seating Die and ships in a green storage box.

  • Select Styles for Availability
5 out of 5 Customer Rating

Use It With

Model: 9315
Model: 9634
Model: 9340
Model: 87305

These two die-sets are intended for reloading bottleneck cases. The set consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. This die sizes the outside of the case, de-primes, and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full-length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Don't forget the shell holder - Click Here to Get Yours.

  • Standard 7/8"-14 Thread
  • Proprietary Die Steel
  • Set includes Full-Length Sizing die and Bullet Seating Die
  • Sizing die brings cases to SAAMI minimum cartridge dimensions
  • Ships in Green Die Box
  • Made in USA


RCBS Group A Full-Length Sizing Die Set
Matchmaster Case Overall Length

Group A Full-Length Sizing dies size your brass to SAAMI specifications for optimal chambering and accuracy. The inside is beautifully finished to facilitate ease of sizing and extraction from the die while not scratching your valuable brass.

Matchmaster Bullet Seating

The Group A full-length sizing die features an expander-decapping unit. The decapping pins are replaceable should you break one or need a different size.Click here for replacements.

Matchmaster Case Overall Length

RCBS Group A die sets are manufactured of the finest steel right here in the United States in our Oroville, California factory.

RCBS Bushing

The Group A seater die implements a bullet seater plug that adjusts the bullet seating depth to your desired case overall length (COAL), and the inside of the body has a crimp taper to crimp your cartridge if you desire.

RCBS Reloading Dies
Limited Lifetime Warranty

RCBS reloading dies is warranted to be free from defects in material or workmanship for as long as the original owner owns it.

RCBS Precisioneered Reloading
RCBS: Precisioneered Reloading

RCBS dies are made in American and hand inspected before ever leaving our factory.



Standard 7/8-inch-14 thread

Sizer Full-Length