.22 Creedmoor Reloading Essentials

Matchmaster dies are the pinnacle of reloading dies with rich features, outstanding fit and finish, and unbeatable accuracy.

Available in both full-length size and neck-size sets, as well as a stand-alone seater die, you will enjoy years of use from Matchmaster dies. Each die is made from case hardened steel, the inside surfaces are precision-drilled and reamed to exacting standards, and hand polished.

Matchmaster sizing dies use interchangeable neck bushings (sold separately). This changeable diameter neck bushing has been used by benchrest and long-range precision shooters for years. This allows you to change the self-centering changeable neck bushing to precisely set the amount of tension on the bullet. It also keeps the brass working to a minimum to extend the life of your cases.

The Matchmaster seater die is beautifully machined, polished, and finished off with a deep blued finish like on the finest firearms. The large, oversized adjustment knob on the Matchmaster seater die has oversized letters and hash marks making it both precise to turn as well as easy to read. Dial one thousandth of an inch, and that is exactly what you will get.

The seater also features our exclusive loading window which allows you to drop the bullet in and simply run the press to seat your bullet. No more trying to balance a bullet on a case mouth or putting fingers in danger. The internal sleeve catches and holds the bullet in perfect alignment with the case and guides it during the seating operation for astoundingly concentric results.

Note: Sizing die requires appropriate neck bushings. Find yours here.

Remember the shell holder. Click Here to Get Yours.

• Full-Length Die Set includes Full-Length Sizing Die and Bullet Seating Die
• Utilizes Neck Bushing to Control Neck Tension (Sold Separately)
• Sizing Die Include Titanium Carbo Nitride Expander for reduced brass build up on expander and smooth case extraction
• Bullet seating window with bullet retention system
• Large Oversize Micrometer for easy adjustments
• Free-floating, self-centering bullet seating stem
• Standard 7/8"-14 Thread
• Limited Lifetime Warranty

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.

• Fits 43 of the most popular Rifle and Pistol cartridges, including: 6.5 Creedmoor, 308 Winchester, 45 Automatic (.45 ACP), 22 Bench Rest Remington
• 22-250 Remington (.22 Varm), 240 Weatherby Magnum, 243 Winchester, 6mm Bench Rest Remington
• 6mm Remington (.244 Remington), 25-06, 250 Savage (.250-3000 Savage), 257 Roberts
• 257 Roberts Improved (40°) *, 260 Remington, 6.5mm-06, 6.5-284 Winchester
• 6.5 x 47 Lapua, 6.5mm x 57, 270 Winchester, 280 Ackley Imp (Nosler), 280 Remington (7mm Exp. Rem.)
• 284 Winchester, 7mm Bench Rest Remington, 7mm-08 Remington, 7mm x 57 Mauser (7mm Mauser)
• 7mm x 64 Brenneke, 30 T/C, 30-06 Springfield, 300 Savage, 7.65mm x 53 Mauser (Belgian)
• 7.7mm x 58 Japanese Arisaka, 8mm x 57 Mauser (8mm Mauser), 8mm-06, 338 Federal
• .338-06, 35 Whelen, 358 Winchester, 9.3mm x 62 Mauser, 370 Sako Mag/9.3x66 Sako
• 400 CorBon, 45 Glock Action Pistol, 22 Creedmore, 6mm GT
• RCBS shell holders are built for Single Stage and Turrets Presses.
• RCBS shell holders are manufactured to exacting tolerances.
• RCBS shell holders are hardened for years of use.
• RCBS shell holders ensure proper alignment between the cartridge and die.
• The Shell holders are cut to .125" depth for proper headspacing.
• RCBS Limited Lifetime Warranty.

These high-quality replacement parts are compatible with the RCBS® Rock Chucker®, Reloader Special™ and most C-frame single-stage presses.

These high-quality replacement parts are compatible with the RCBS® Rock Chucker®, Reloader Special™ and most C-frame single-stage presses.

RCBS® Case Trimmer Collets work like a draw collet on a lathe. They secure cases for trimming to length. Note: For use with Rotary Case Trimmer and Rotary Case Trimmer—2 only.

RCBS® Case Trimmer Pilots are tapered to guide pilot into the case mouth. The design prevents a case from wobbling when being trimmed to length. For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer—2 and Rotary Case Trimmer. For use with RCBS Case Trimmers only.

These tough, plastic boxes have flush exteriors with recessed latches. They're designed to stack easily, and feature an anti-rattle bullet-tip nest, empty case support, and long-lasting hinge. They're available in five sizes.

Decap and lube cases in one step with exclusive RCBS® Lube Dies. They're designed for progressive presses like the Pro 2000®, Piggyback™ II, AmmoMaster® and Auto 4x4, but also works in single-stage presses. Four sizes cover 45 popular calibers.

• Decap and lube cases in one step
• Compatible with progressive and single-stage presses
• Four sizes cover 45 popular calibers
• Faster and cleaner than a lube pad
• Easy to refill with RCBS® Case Lube—2
• Standard 7/8 inch-14 thread